Can you measure a corresponding dimension in the passenger side and
use that as a reference? The sills do provide structure, but ...
Donald.
> From: Ct54531@aol.com
> Date: Wed, 5 Jul 2000 12:56:24 EDT
>
[...]
> see the outline of where the old sill was and where the new one should go and
> therein lies the problem. I can't say it doesn't fit but it's not that close
> either.
> With the new sill in place with regard to the top flange, the bottom flange
> is a good 3/8 of an inch below the floor pan. It doesn't sound like much when
> I say 3/8" but it seems like it on the car.
[...]
|