triumphs
[Top] [All Lists]

Re: Tools for body sheet metal?

To: David Massey <105671.471@compuserve.com>
Subject: Re: Tools for body sheet metal?
From: "T.R. Householder" <trhouse@greenapple.com>
Date: Wed, 05 Jul 2000 22:46:55 -0400
Cc: "Paul J. Burr" <tigerpb@ids.net>, Cliff Hansen <hansenc@flash.net>, "[unknown]" <triumphs@autox.team.net>
References: <200007051138_MC2-AB23-EB5F@compuserve.com>
Bought a small recipricating saw (air tool) $59.00 at Lowes. Can use your old
hack saw blades for replacement blades.... BEST THING I BOUGHT SINCE MY TORCH
25 years ago!!!!!

T.R.

David Massey wrote:

> Message text written by "Paul J. Burr"
> >Whoa! A dremel is fine for cutting rusted bolts, but large scale body
> work?
> It will take you a week to cut out a couple of square inches.<
>
> You are over stating the situation.  True an air powered cut off tool works
> more quickly but if you don't have an air compressor you will need a
> further investment.  And the Dremel tool is smaller and will fit in tighter
> environs.  Patience and a steady hand works wonders with a dremel too.
>
> Dave


<Prev in Thread] Current Thread [Next in Thread>