AARRGHH
I just finished machining and installing a matching plate for the left side
spring, thinking the DPO had forgotten to install one- Sometimes it becomes
apparent the DPO was actually The Factory!
Now Level, but Incorrect! Damn!
Bob Westerdale
59 3A TS36967E
Dennis Lambert wrote>
Technically, the springs are not "handed"; the same spring will work for
either
side. Rather, the right spring has a small extra plate installed just under
the
axle, on top of the spring. This effectively lowers the body on the
passengers
side by about 1/4"
|