Help needed! I am having trouble with uneven braking on the front of my
TR-6. Under hard braking the drivers side tire seems to receive more
pressure than the right. It will lock up while the passenger side won't. I
have gone through a process of elimination as follows.
1) bled, bled, & bled. No difference.
2) replaced all rubber flex lines (they were old) with braided stainless. No
difference.
3) replaced the crossover line that runs next to the frame as it had a very
small dent in it. No difference.
My next plan of attack is to disassemble the right front caliper to see if I
see something. Does the list have any other ideas before I go this route?
Thanks for your help.
Marty
|