> From: Eric Conrad [mailto:conrade@qwest.net]
> Sent: April 9, 2001 9:04 AM
>
> Before I order new shear bolts, which I'd rather not do,
> would anyone have the bolt specs for these bolts: i.e.
> thread count, type of thread, ....
> Again, I'd like to use a regular hex head bolt, with the
> correct thread.
Eric, on my very late 76 TR6 I used a couple of SS allen head bolts to fit
my ignition housing. M8-20, 3/4" long. Others have said they used 5/16 UNF
but that did not match my car. I did have to file down the bolt heads so
they would fit into the recesses in the housing, initially the bolt head
diameter was to large for the recess. I think if you tried hex head bolts
it'd be hard to find a socket to fit inside the housing.
HTH.
Peter Zaborski CF58310UO
///
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
///
|