Rosspemlee@aol.com wrote:
>
> Can I cut the shaft w/o developing so much heat that I would damage the case?
Should be no problem. Good application for one of those cheap 4" angle
grinders from Harbor Freight, with an abrasive cutoff blade. When heat
is a concern with something like this, I spritz it with a hand spray
bottle filled with water while making the cut. But, if you cut next to
the fork, I think the distance to the housing will let enough heat
dissipate.
Randall
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|