triumphs
[Top] [All Lists]

Re: { NASS } better head gasket and source

To: <nass@yahoogroups.com>, <triumphs-owner@autox.team.net>, <triumphs@autox.team.net>, "CARS Spitfires@Autox. Team. Net \(E-mail\)" <spitfires@autox.team.net>, <spitfire-enthusiast@egroups.com>, <SPIT6CGT6@yahoogroups.com>
Subject: Re: { NASS } better head gasket and source
From: "Ptegler" <ptegler@gouldfo.com>
Date: Wed, 24 Oct 2001 10:25:37 -0400
Organization: Gould Fiber Optics f9OELhQ08770
References: <82C291F80EF7D311B2EE0090277A49F501469235@REXCH>
yep..  new that... but where can I buy one for 
a Spitfire 1500 engine?  ASAP!

Paul Tegler     ptegler@gouldfo.com    www.teglerizer.com


----- Original Message ----- 
From: "Craig Smith" <craigs@iewc.com>
To: <nass@yahoogroups.com>; <triumphs-owner@autox.team.net>; 
<triumphs@autox.team.net>; "CARS Spitfires@Autox. Team. Net (E-mail)" 
<spitfires@autox.team.net>; <spitfire-enthusiast@egroups.com>; 
<SPIT6CGT6@yahoogroups.com>
Sent: Wednesday, October 24, 2001 9:33 AM
Subject: RE: { NASS } better head gasket and source


The best head gasket manufacturer is FelPro.
Way above the competition.

ARP,
If you are doing a rebuild it isn't necessarily mandatory to replace the
bolts but I would.
If I'm going to all the trouble of removing all the stuff and doing it, do
it correctly.
Bolts stretch, it's hard to believe but it's true.
Make real sure if you do use the ARP bolts that you chase the threads and
use an assembly lube on the bolts when you re-torque.


-----Original Message-----
From: Ptegler [mailto:ptegler@gouldfo.com]
Sent: Wednesday, October 24, 2001 8:28 AM
To: triumphs-owner@autox.team.net; triumphs@autox.team.net; CARS
Spitfires@Autox. Team. Net (E-mail); spitfire-enthusiast@egroups.com;
SPIT6CGT6@yahoogroups.com; nass@yahoogroups.com
Subject: { NASS } better head gasket and source


OK...asking for the collective list wisdom....

I'm looking for the better quality in head gaskets
for a Spitfire 1500 engine.
Who/what/where delivers a decent quality head gasket?

VB now carries ARP head stud sets... are they worth 
the money  (~$80 vs stock at half that)

Paul Tegler     ptegler@gouldfo.com    www.teglerizer.com
  



To unsubscribe from this group, send an email to:
nass-unsubscribe@yahoogroups.com

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 


To unsubscribe from this group, send an email to:
nass-unsubscribe@yahoogroups.com

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 

///  triumphs@autox.team.net mailing list
///  To unsubscribe send a plain text message to majordomo@autox.team.net
///  with nothing in it but
///
///     unsubscribe triumphs
///
///  or try  http://www.team.net/cgi-bin/majorcool


<Prev in Thread] Current Thread [Next in Thread>
  • Re: { NASS } better head gasket and source, Ptegler <=