> finally, there is a stripped stud on one of the rear wheels (lug nut
> turns but doesn't loosen). Any suggestions on dealing with this?
If it will tighten, you can just tighten til it snaps, pop out the stud
and replace with new. I think they are only 7/16" and snap quite easily
with a cross wrench.
Good luck,
Jay Welch, Abington MA
1971 TR6 project
1973 TR6 driver - wanting to "Drive it Hard"
Member "Cape Cod British Car Club" @
http://clubs.hemmings.com/capecodbritish/
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|