----- Original Message -----
From: "Bernie" <bernd.vabeach@erols.com>
To: <triumphs@autox.team.net>
Sent: Tuesday, February 05, 2002 7:06 PM
Subject: Re: TR6 Redlines
> I purchased the same redlines from Coker about a year ago, I found Coker
to
> be courteous and pleasurable to deal with.
> I do not have the vibration problems Mark spoke off, maybe I was lucky,
> depending how far away you are Mark I do have some extra rims
> Bernie
> Chesapeake, Virginia
> 74 TR6
> 71 MGB
> 72 MGB
>
>
> ----- Original Message -----
> From: "Mark Hooper" <mhooper@pixelsystems.com>
> To: <triumphs@autox.team.net>
> Sent: Tuesday, February 05, 2002 5:24 PM
> Subject: RE: TR6 Redlines
>
>
> > I put Coker 3/8" redlines on my 72 TR6. They look very nice. However I
am
> > told by the mechanics that they had to put a fair bit of weight on the
> rims
> > to balance the tires. I do have a 60 mph vibration. I know my rims are
not
> > perfect, but am uncertain if the problem is tires or rims. I am trying
to
> > find a local rim straightener to start solving the situation.
> >
> > BTW, memory says that the Diamond tires are re-done Denmens, but don't
> quote
> > me.
> >
> > Mark Hooper
> > 72 TR6
> >
> >
> > -----Original Message-----
> > From: FOXMETCO@aol.com [mailto:FOXMETCO@aol.com]
> > Sent: Tuesday, February 05, 2002 1:21 PM
> > To: triumphs@autox.team.net
> > Subject: TR6 Redlines
> >
> >
> > Can anyone give any advice on a set of TR6 Redlines. Finishing a 2 year
> > frame
> > off and will be needing the tires soon.
> > Seems to be three sources, Diamond Back, Coker and British Wire Wheel.
> > Thanks
> > Jeff Fox
> > S.F. Bay Area
> > 74 TR6 CF24489UO
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|