I repositioned the seats on my TR3A when I rebuilt them. The PO had welded
in steel plates instead of new floors, so that may make a difference. Just
check clearance for everything underneath first to make sure you don't
drill through the frame of the fuel line.
----- Original Message -----
From: "Bill Pugh" <anabil@caltel.com>
To: <triumphs@autox.team.net>
Sent: Tuesday, February 19, 2002 9:28 AM
Subject: Re: how big
> We have just the opposite problem with Casper (57 TR3), AnnaBelle
> can't get the drivers seat far enough forward to comfortably reach
> the pedals, so I have to drive all the time....awwwwww <G>.
> Seriously, would it be possible to drill additional mounting holes in
> the seat pan so it could be moved forward another 2 or 3 inches?
> Thanks for the Help
>
> --
> Bill Pugh
> 1957 TR-3
> aka Casper
> TS16765L
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|