mbarre@juno.com wrote:
>
> I just put a 2-4 psi electric pump in my 71 TR-6 that had been sitting for 6
>months and it is flooding out my dual downdraft webers - gas bubbling out the
>carbs.
>
> Is this too much pressure or are the floats likely stuck in the bowls... or
>both? I have one of those dial a pressure regulators that I could install if
>needed, but it may be time to rebuild the carbs - any reccommendations on
>where to get rebuild kits?
>
> Thanks,
> Matt Barre
> Mobile, AL
> 71-TR6 60-TR3A
Matt,
Install the regulator and preset it to about 2.5 psi to start.
Joe
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|