triumphs
[Top] [All Lists]

Re: Ramps vs Stands

To: "Dave Massey" <105671.471@compuserve.com>, "Scott Tilton" <stilton@protoprod.com>
Subject: Re: Ramps vs Stands
From: "William Davies" <bill@rarebits4classics.co.uk>
Date: Thu, 25 Sep 2003 16:35:43 +0100 h8PFrKF8007367
Cc: <triumphs@autox.team.net>
References: <200309250821_MC3-1-4FF7-5314@compuserve.com>
----- Original Message ----- 
From: Dave Massey <105671.471@compuserve.com>
> 
> So, as Scott pointed out, it is important that the ramps remain stationary
> when you attempt to drive on and off of them.  They may work well enough on
> a driveway where the surface is intentionally rough but certainly not on a
> smooth garage floor.

A few offcuts of old carpet are useful with ramps. Cut sections narrow enough 
to go between the slats on each ramp. Thread them through the ramps so they 
double back on themselves. As you approach the ramps the weight of the car on 
the carpet will stop the ramps sliding out. If you're concerned about the ramps 
slipping when the front wheels are entirely off the ground then wrap the carpet 
around the slat closest to the top of each ramp.
    Cheers,
        Bill.

--
Rarebits4classics
       .......just what you've been looking for

PO Box 1232
Calne
Wiltshire
SN11 8WA
United Kingdom
http://www.rarebits4classics.co.uk




<Prev in Thread] Current Thread [Next in Thread>