I wonder how useful anti-seize compound would be for this application?
Joe
-----Original Message-----
From: owner-triumphs@autox.team.net
[mailto:owner-triumphs@autox.team.net] On Behalf Of ZoboHerald@aol.com
Sent: Saturday, May 21, 2005 6:08 AM
To: jpg2@comcast.net; triumphs@autox.team.net
Subject: Re: Wire Wheel Spline Lube
In a message dated 5/21/2005 8:45:41 A.M. Eastern Daylight Time,
jpg2@comcast.net writes:
What's the recommended grease for wire wheel splines?
======
An article on a major North American Triumph club web site suggests the
use
of PBC (Poly Butyl Cuprasyl, a copper-based lubricant). My TR3 factory
manual
simply says "grease." I suspect most any modern grease would be
sufficient,
as I believe the key is keeping the splines clean and properly greased.
--Andy Mace
|