In a message dated 7/10/2005 7:18:04 PM Central Standard Time,
mkatona@pinetel.com writes:
> I tried searching the archives but can't come up with my exact problem. I
> have replaced all of the internal parts to my clutch (those within the bell
> housing) and I am still having the same problem, when I depress the clutch
> pedal several times, usually on the 3 or 4th push the pedal is hard to the
> top end and will not depress. After a minute or 2 then I am able to repeat
> the above. About all that is left is the master and slave cylinders.
> I did bleed the system before installing the new clutch parts.
>
Check also the clutch hose. Sounds like it is deteriorating and doing the
"check valve" thing hydraulic hoses are famous for.
Dave
|