Re: Distributor details for a 1966 TR4A

["wmpless" <wmpless@iprimus.ca>]

Hi,
Carl, thanks for the details and the suggestions. Will buy the primary and
secondary springs from Moss. Right now I have an advance arm limiter with 15
degr. and on the adv. vac. unit I have the figures 4-14-8. The distributor
housing was made 8/67.
In the meantime I bought a Lucas distributor # 40735A. 25D4, which the same
advance specs as the 40795.
The Vac. adv. unit is to be defective and therefore appreciate to receive the
name and address of a rebuilder.
Many thanks again for the assistance given. Wiard