triumphs
[Top] [All Lists]

Re: [TR] Houston update

To: "Eureka Saws Co, Inc." <ambritts@ptdprolog.net>
Subject: Re: [TR] Houston update
From: "Paul Dorsey" <dorpaul@negia.net>
Date: Sun, 16 Jul 2006 15:31:42 -0400
roger, roger, mission control here:
At Advance Auto Parts I picked up a very similar, and same size temp gauge 
for under $20.
It's a capillary type and works great.
Paul

ps- if not them you might try NASA, i mean NAPA




 Mission Control,
> Reporting from 5 miles above the earth surface. :o) Fuel gauge works fine,
> especially when you put enough gas in the tank to have the gauge read it.
> (duh!) All ground connections are working for engine start. Polarized  the
> generator, hooked up the two harness wires to the generator. Started up my 
> LBC
> hemi, runs like a kitten, and no leaks. One puzzling thing. There is this 
> red
> light on the gauge cluster that stays lit. (This must have something to do
> with the electricals, to early for Christmas decorations) Ammeter reads to 
> the


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org



<Prev in Thread] Current Thread [Next in Thread>