Frank,
That bracket is original and easily lost. Count yourself lucky to have it!
Good luck,
Jim
Jim Bauder
'68 TR250, CD47L
TR web site: http://www.triumphowners.com/647
Scottsdale, AZ
-----Original Message-----
From: owner-triumphs@autox.team.net
[mailto:owner-triumphs@autox.team.net]On Behalf Of FGFO1@aol.com
Sent: Tuesday, August 08, 2006 3:50 PM
To: triumphs@autox.team.net
Subject: [TR] TR3 rear fender
just bought a really great rear fender off ebay. what a deal. deadly
straight.
it came with a bracket attached that was not on any of my 3 other rear
fenders.
the bracket is about 4 inches long and has a bend at the end of it. about a
1/4". so it is a very shallow angle. it also has a captured nut attached. if
it wasn't stuck on it could easily have been lost or discarded on mine.
it is firmly attached to the very last rear most hole of the fender. it
looks like it would provide clamping action right up close to the rear
light.
original or smart aftermarket?
thanks
Frank
Temecula CA
58 TR3 TS41366L
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|