RE: [TR] TR3 rear fender

["Randall" <tr3driver@comcast.net>]

> it came with a bracket attached that was not on any of my 3 other rear  
> fenders. 
> the bracket is about 4 inches long and has a bend at the end of 
> it. about a  
> 1/4". so it is a very shallow angle. it also has a captured nut 
> attached.

Sounds like you are describing P/N 602167.  $4 @ TRF.

Randall


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org