You would be better off just finding the right carbs off of Ebay.
Have your Tried British Sports Cars of San Luis Obispo on Marsh
Street? They are in your neck of the woods and I have bought lots of
stuff there.
Bill Brewer
Tehachapi, CA
TS72747LO
Date: Mon, 21 May 2007 18:46:55 -0700
From: "STEVE BALL" <banjonut@verizon.net>
Subject: [TR] Carb linkage parts needed
Hello list,
Here I am again, looking for parts. I'm in the process of rebuilding
my '60
TR3A, and since I basically don't have the right carburetors (a long
story)
I'm going to do some slight modification. I plan to use the curved TR4
manifold, along with the later model HS6 SU carbs. However, I have
run into a
bit of a snag...I got an email from Robert Goldman at Moss today
saying the
throttle operation on the HS6 is backwards from the H6, so I will
need to
basically use the TR4 linkage arrangement which is shown at the
bottom of Pg
28 in the latest Moss catalog. Unfortunately they (Moss) don't sell the
mounting bracket (illus. 75), so now I'm in the market for any (or
all) of
this linkage hardware, including that bracket. Does anybody have any
idea
where to find it?
Please respond off list because I get the digest.
email: banjonut@verizon.net
Thanks again ....in advance,
Steve Ball
Lompoc Ca
TS68164L
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|