In a message dated 1/16/2008 1:34:45 PM Central Standard Time,
acs25m@swbell.net writes:
> Hi all,
> What is the lists thoughts on weather or not to use thread locker on
> the flywheel bolts?
>
Can't hurt. It will make disassembly a bit more difficult but if you have an
impact wrench ti should be no problem. But I wouldn't forgo the locking
plates.
Dave
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|