triumphs
[Top] [All Lists]

Re: [TR] Rear leaf springs

To: triumphs@autox.team.net
Subject: Re: [TR] Rear leaf springs
From: "TeriAnn J. Wakeman" <tjwakeman@gmail.com>
Date: Sun, 02 Aug 2009 18:37:01 -0700
spook01 wrote:
> you can still buy the gaiters for your springs.  they work great. just 
> remember to keep 'em full!
> Best,
> Ray
Geezzz folks, that is so old school.  You need to be more flexible.

To minimize the friction between the individual leaves. I like UHMW 
(ultra-high molecular weight) Polyethylene plastic layered between the 
leaves.

This plastic provides a low friction surface, similar to Teflon tape, 
but with a much higher abrasion and puncture resistance. It was designed 
specifically for commercial use on chutes, packaging lines, slides, and 
anywhere high pressure metal to metal sliding contact occurs. It also 
provides sound dampening, eliminating squeaks and rattles caused by 
adjacent parts movement. The plastic's temperature range is -40 to +225 
degrees F.

The plastic tape I like is 0.005" thick, comes on a 3 inch wide roll and 
has 1.5 mils of acrylic adhesive. It can be purchased from McMaster Carr 
(http://www.mcmaster.com/) and is part number 76445A24 (You can do a 
part number search on their site to find the tape).

You disassemble the spring pack and stick the tape to the top side of 
each individual leaf, except for the top leaf of course. This tape 
virtually eliminates the friction between adjacent leaves in the leaf 
pack and dramatically increases the spring's ability to react to bumps 
in the road.

TeriAnn
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>