triumphs
[Top] [All Lists]

Re: [TR] Rear leaf springs

To: triumphs@autox.team.net
Subject: Re: [TR] Rear leaf springs
From: "TeriAnn J. Wakeman" <tjwakeman@gmail.com>
Date: Sun, 02 Aug 2009 21:42:05 -0700
Randall wrote:
>> The plastic tape I like is 0.005" thick, comes on a 3 inch wide roll and
>> has 1.5 mils of acrylic adhesive. It can be purchased from McMaster Carr
>> (http://www.mcmaster.com/) and is part number 76445A24 (You can do a
>> part number search on their site to find the tape).
>>     
>
> Thanks for the tip, TeriAnn.  I was planning to use Teflon next time I had
> my springs apart, but I'll get the UHMW PE instead.
>
> Randall
>   
Glad I could be of assistance.  Flabbergasted that I knew something that 
you were unaware of.  I've had UHMW strips between the leaf springs of 
my 1960 Land Rover for almost 11 years now, through mud, sand and just 
about any kind of natural grit you could think of and the plastic is 
still in good condition.

TeriAnn
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>