triumphs
[Top] [All Lists]

Re: [TR] TR6 evaporative filter - function or setup question

To: triumphs@autox.team.net
Subject: Re: [TR] TR6 evaporative filter - function or setup question
From: Dave1massey@cs.com
Date: Tue, 27 Apr 2010 17:02:36 EDT
In a message dated 4/27/2010 3:45:08 PM Central Daylight Time, 
mhooper@digiscreen.ca writes: 
> Why does this have such a huge impact on the engine (especially idle) 
> when the
> pipe to the valve cover is unplugged? It really seems to unbalance things 
> a
> lot. The carbs are newly rebuilt with only less than 1000 miles on them, 
> so I
> don't think anything is jammed open etc.
> 

The source of suction is the venturi in the carburettor.  Introducing a 
significant amount of air (compared to air flow at idle) will change the 
fuel/air ratio.  The carb is calibrated to compensate the typical amount from 
the 
crankcase and the charcoal canister based on the restriction of those two 
paths.  Disconnecting the hose from the valve cover changes that restriction 
and will increase the amount of air leaning out the idle mixture.  Plugging 
the hose will reduce the amount of air causing the idle mixture to be rich.  
It's all a delicate balance.

Slante

Dave

_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>