Re: [TR] Intake Manifold Bolt Issue

["Dave" <dave@ranteer.com>]

I had to use vice grips recently on a manifold bolt (after using a smoky 
wrench)

-----Original Message----- 
From: Andrew Uprichard
Sent: Tuesday, June 05, 2012 4:56 PM
To: 'Larry Brouder' ; triumphs@autox.team.net
Subject: Re: [TR] Intake Manifold Bolt Issue

Is this a case where you can put a nut on the bolt, weld it in place and
then remove by turning the nut?  Worked in the past with me for a head stud
that was locked in place.

** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/triumphs-archive@autox.team.net