triumphs
[Top] [All Lists]

Re: [TR] Intake Manifold Bolt Issue

To: triumphs@autox.team.net (Win)/6.0.13_GA_2944)
Subject: Re: [TR] Intake Manifold Bolt Issue
From: terryrs@comcast.net
Date: Tue, 5 Jun 2012 23:08:29 +0000 (UTC)
Delivered-to: triumphs-archive@autox.team.net
Delivered-to: triumphs@autox.team.net
List-archive: <http://autox.team.net/pipermail/triumphs>
List-help: <mailto:triumphs-request@autox.team.net?subject=help>
List-id: Triumph Sports car discussion <triumphs.autox.team.net>
List-post: <mailto:triumphs@autox.team.net>
List-subscribe: <http://autox.team.net/mailman/listinfo/triumphs>, <mailto:triumphs-request@autox.team.net?subject=subscribe>
List-unsubscribe: <http://autox.team.net/mailman/options/triumphs>, <mailto:triumphs-request@autox.team.net?subject=unsubscribe>
Since it could be y our one chance before breaking the stud off, don't forget 
the numerous pre-heats and soakings with bolt laxitive (Powerblaster).

>>I had to use vice grips recently on a manifold bolt (after using a smoky 
>>wrench)

>Is this a case where you can put a nut on the bolt, weld it in place and
>then remove by turning the nut?  Worked in the past with me for a head stud
>that was locked in place.

** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/triumphs-archive@autox.team.net

<Prev in Thread] Current Thread [Next in Thread>