Next thing will be a Flux Capacitor!
-----Original Message-----
From: Brad Kahler
Sent: Tuesday, August 14, 2012 7:40 PM
To: Triumphs
Subject: Re: [TR] Adding a VSS pulse generator inline with speedometer cable
Well a bunch of you have suggested/recommended the magnets on the drive
shaft option. I did find a magnet setup that was about $20 cheaper than
Amazon http://www.summitracing.com/parts/RPC-250-4165/?rtype=10
I will check out Susquehanna Motorsports as suggested by Phil.
I'm going to search a little while longer trying to find someone that will
modify a speedometer cable to work with a pulse generator but at least I
have a fall back option that is not all that expensive.
Thanks!
Brad
On Tue, Aug 14, 2012 at 4:32 PM, Lee Daniels <lee@automate-it.com> wrote:
Speaking of Voila!, here's
http://amzn.com/B0009GVUG8
Magnetic VSS Speed Pulse Generator Kit for Rostra and Audiovox Cruise
Control
also see them on ebay.
> Or, as an alternative I remember adding cruise to an old truck, they
sent me
two magnets and roll of tape. Strap one to the driveshaft and the other
mounted on a bracket in close proximity. Voila! Le pulse generator.
Drove
that old truck for 20 years.
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/bkahler1@gmail.com
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/jerryvv@roadrunner.com
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/triumphs-archive@autox.team.net
|