triumphs
[Top] [All Lists]

Re: [TR] TR6 door pins

To: Stan Foster <stan@redtr6.com>
Subject: Re: [TR] TR6 door pins
From: Joe Burlein <floridatr6@cfl.rr.com>
Date: Sun, 8 Nov 2015 18:04:13 -0500
Cc: Triumphs <triumphs@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
References: <29446028-0054-497D-8156-B4B4D7B86069@cfl.rr.com> <BLUPR05MB74033684A367558E7A4EA25FE160@BLUPR05MB740.namprd05.prod.outlook.com>
If I can't get the pins to work, I'll try the hanger idea. Thanks. 

Joe B
72 TR6

> On Nov 8, 2015, at 17:57, Stan Foster <stan@redtr6.com> wrote:
> 
> Numerous options after you have compressed the gubbins to expose the spindle 
> and hole including surgical locking forceps to hold the pin secure while you 
> insert it or use coat hanger wire, sawn through about half inch from the end, 
> insert it and then bend to break off the end remaining in the handle spindle.
> 
> Stan
> 
> -----Original Message-----
> From: Triumphs [mailto:triumphs-bounces@autox.team.net] On Behalf Of Joe 
> Burlein
> Sent: Sunday, November 8, 2015 4:27 PM
> To: Triumphs <triumphs@autox.team.net>
> Subject: [TR] TR6 door pins
> 
> Ok, it has been years since I've had the door panels off my car. I just got 
> done doing some work on them and I can't get the stupid handles on!  What is 
> the trick?!?  HELP! 
> 
> Joe B
> 72 TR6
> 
> ** triumphs@autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/triumphs/stan@redtr6.com

** triumphs@autox.team.net **

Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>