triumphs
[Top] [All Lists]

[TR] torque wrench question

Subject: [TR] torque wrench question
From: jdinnis at gmail.com (John Innis)
Date: Fri, 10 Aug 2018 13:07:58 -0500
References: <CANLCLaHs1mtOkE_mM_A-tYmfmW6zf1Qnj2QG5_q3ixtuJ-Bo8g@mail.gmail.com>
This is a tricky question.  The correction factor actually depends on the
length of the crows foot and the direction it is installed on the torque
wrench.  Fortunately some helpful soul has created a web site to do the
math for you, just punch in the measurements it asks for and it will give
you the answer you need.
http://www.cncexpo.com/torqueadapter.aspx

On Fri, Aug 10, 2018 at 11:17 AM, Sujit Roy <triumphstag at gmail.com> wrote:

> Due to tight space, I can't put a socket on the end of a torque wrench,
> but I can put a small Craftsman crow foot on the end.
>
> If I do this, by what factor should I add or remove from the specified
> torque for a bolt?
>
> I'm working on a Triumph gearbox with OD.
>
>
> Sujit
>
> --
> Sujit Roy
> Cupertino, California
>
> https://triumphstagblog.wordpress.com/
>
>
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/triumphs/jdinnis at gmail.com
>
>


-- 
=================================
= Never offend people with style when you   =
= can offend with substance --- Sam Brown  =
=================================
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/triumphs/attachments/20180810/b8b3783e/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>