[6pack] [TR] installing rubber suspension bushings

[Bob Danielson]

I did something very similar using PVC pipe, A socket and threaded rod.

Bushing removal here: http://tr6.danielsonfamily.org/TrailingArmBushings.htm

Bushing Installation here: 
http://tr6.danielsonfamily.org/TrailingArmBushingInstall.htm

Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection,
Toyota 5 speed & Nissan LSD
http://tr6.danielsonfamily.org

--------------------------------------------------
From: "Al Salvatore" <tr6parts at charter.net>
Sent: Sunday, December 06, 2009 11:23 PM
To: <6pack at autox.team.net>
Subject: Re: [6pack] [TR] installing rubber suspension bushings

> There used to be an article in the archives on this.
>
> Its what I used years ago to put in the uprated rubber bushings.
> Need a large C-clamp,  thick piece of wood.
> Get some white PVC pipe , I think it was  2 inch diameter,
> cut it long enough for the bushing.
> Lube the bushing, place it in the pipe over the trailing arm,
> place the wood over the other hole, use C-clamp to press the bushing in.
> .
>
> Al