[6pack] Floorpan replacement and Rust repair quote...

[alan salvatore]

To replace the whole floor pan the body has to come off.
No ifs, ands, or buts.
Al
On Jun 26, 2015 1:01 PM, "James_ via 6pack" <6pack at autox.team.net> wrote:

> So to follow up on this topic...
> Has anyone replaced the full floor pan? Meaning, not just leaving an edge
> of the old pan to weld to and leaving the flat side that gets spot welded
> to the inner sill or rocker panel?
> I looked carefully under the car and the passenger side has indeed been
> replaced before and they left the original lip or flat side intact and then
> welded on top of it.
> I suspect this is because that may be difficult to get to and maybe a body
> off is the only way to properly replace.
> I really rather replace the entire floor pan. Is it possible w/o lifting
> the body off?
> I signed up for a welding class (there goes my summer Saturday
> afternoons-that was painful to do given the amazing summers oregon has)
> In any case it sounds like a pain of a job to complete a replacement of my
> pans.
> Mine are in rough shape and doubtful I'd have a good lip to weld to and
> I'd hate to cut/butcher my beautiful new pans.
>
> Cheers
>
> James
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> 6pack at autox.team.net
> http://autox.team.net/mailman/listinfo/6pack
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/6pack/alansalvy@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/6pack/attachments/20150626/34bb6bc4/attachment.html>