[Fot] distributors (2nd part)
Dick Stockton
stocktontr4 at gmail.com
Sun Feb 23 15:02:05 MST 2014
Marcel,
The cam is likely flexing causing the erratic timing at higher rpms. The
gear is in an unsupported section where a bearing should be and the cams
flex and break at this location. Cutting down the base circle for more lobe
lift makes it worst.
Dick
On Sun, Feb 23, 2014 at 5:41 AM, Van Mulders Marcel <
van.mulders.marcel at telenet.be> wrote:
> Yesterday I swapped for an identical Mallory distributor, with cap and
> leads
> and no play in the shaft bearing. Also tried a new coil and ran the engine
> without alternator : no improvement at all. So I'm looking for another type
> of distributor. Any other suggestions to improve the timing?
> Marcel, Belgium (I lost part of the mail when sending it)
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/stocktontr4@gmail.com
More information about the Fot
mailing list