[Fot] Timing a TR6 for Webers

[Charly Mitchel]

I run about 350 total advance on my full race motor.
I was once told you advance the distributor until the motor 'pings' and then 
back it of a couple of degrees. I'm not sure if this is true with race 
motors running on high octane fuel.
I run about 11:1 CR a D9 cam and fuel injection with my cam timing about 
1070.
I don't know what it is at idle, I'd guess about 170.

Charly Mitchel
TR6 #44
----- Original Message ----- 
From: "sherry robyn" <sherryjimmy6116 at att.net>
To: <fot at autox.team.net>
Sent: Wednesday, September 10, 2014 4:25 PM
Subject: [Fot] Timing a TR6 for Webers


>I am trying to set the TOTAL timing on my 74 TR6.  The motor is stock 
>compression, mild cam, headers, electronic ignition, and triple dcoe 2 
>Webers.  It was an SCCA racer in the late 80s early 90s.  I added the 
>triple Webers and use it to autox and hillclimb.   The distributor is a 
>41306B.  I am not interested in initial timing only total timing.  If 
>nothing else, please tell me your total timing and briefly describe your 
>motor.  Anything from a stock motor to full race motor are of interest but 
>especially those with triple Webers.
>
> Thanks, Jim
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/fot/charly@mitchelplumbing.com