[Fot] Tr3/4 In/Ex gasket

[Greg Blake]

I had problems with this before and it turned out to be an untrue header flange. Once I fixed the flange issue, I have gotten away with doubling up on the standard gaskets, but they eventually fail. I had a company that makes graphite gaskets for industrial purposes run me a small batch a few years ago. These have performed flawlessly. I'll go thru my records and send there info later today. Great company. 

Greg 

Sent from my iPhone

> On Oct 30, 2015, at 8:21 AM, fmccjr at aol.com wrote:
> 
> Hi Everybody,
> 
> In the process of removing the transmission after the OD exploded at the Lime Rock Historics, I discovered that my exhaust gasket shows leakage. Perhaps the lower studs weren't tightened enough(?). What gasket would you recommend to replace it? I forget what was there before- probably one that came with the set I got from BFE...
> The header has a 1/2" thick flange, and I believe it is flat, but I will be checking that later today.
> Thanks! I hope to get this car sorted and trouble free for racing next season!
> 
> Rick McCurdy
> Newburgh, NY
> Red w/ white stripe TR3 #132
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/gblake58tr3@icloud.com
> 
>