[Healeys] Radius arm replacement BJ8

[Tom Mitchell]

Hi Dan,
I’ve done a couple and eventually I had to sawzaw the bolts.

Dr.Mitchell's Gmail


On Sun, Mar 16, 2025 at 3:00 PM <dwernervt at gmail.com> wrote:

> I’m in the midst of replacing the rear wheel bearings, seals, etc. The
> backing plates are now blasted and the paint is curing. Shocks, links, hand
> brake cable and fittings were done last year, but it didn’t have time to
> get to the radius arms.
> Anyone have a tried and true procedure to get these out? Disconnect the
> prop shaft, brake line tee fitting, handbrake fittings and then support the
> axle housing and lower the springs enough to rotate the housing rearward?
> Thanks,
> Dan Werner
>
> Sent from my iPad
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/drtommitch@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20250316/6be93bab/attachment.htm>