[Healeys] Radius arm replacement BJ8

[Michael Salter]

What you describe is the easy bit. As Tom said getting the bolts out
without damaging other parts can be very tough.

M



On Sun., Mar. 16, 2025, 5:36 p.m. Tom Mitchell, <drtommitch at gmail.com>
wrote:

> Hi Dan,
> I’ve done a couple and eventually I had to sawzaw the bolts.
>
> Dr.Mitchell's Gmail
>
>
> On Sun, Mar 16, 2025 at 3:00 PM <dwernervt at gmail.com> wrote:
>
>> I’m in the midst of replacing the rear wheel bearings, seals, etc. The
>> backing plates are now blasted and the paint is curing. Shocks, links, hand
>> brake cable and fittings were done last year, but it didn’t have time to
>> get to the radius arms.
>> Anyone have a tried and true procedure to get these out? Disconnect the
>> prop shaft, brake line tee fitting, handbrake fittings and then support the
>> axle housing and lower the springs enough to rotate the housing rearward?
>> Thanks,
>> Dan Werner
>>
>> Sent from my iPad
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation  $12.75
>>
>> Archive: http://www.team.net/pipermail/healeys
>> http://autox.team.net/archive/healeys
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/drtommitch@gmail.com
>>
>> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20250316/bffd4e2f/attachment.htm>