[JAGNUTS] Need a Distributor Part

[Anthony Koschinsky]

I can bring one to the office tomorrow. Do you prefer Phillips or slotted?

Sent from my iPhone

On 2012-05-27, at 4:48 PM, "Bob" <jaguar at englandengineering.com> wrote:

> I'm hoping someone out there might have the small machine screw that holds
> the condenser in the distributor.  I went to change the condenser in the E
> today and found that the Phillips notches in the head of the screw are
> completely stripped.  It was no problem getting the screw out with a set of
> small pliers and I could reuse it in a pinch, but if someone has a spare of
> these machine screws out there that would be much better.  Alternatively,
if
> someone knows somewhere in town that you can get one (it is not metric nor
> standard imperial - I suspect it is one of those BA type machine screws).
> The distributor is a Lucas.
>
>
>
> Thanks.
>
>
>
> Bob
> _______________________________________________
> JAGNUTS Regina  -  mailing list
> REPLY TO : Jagnuts at autox.team.net
> http://nonprofits.accesscomm.ca/jagnuts/Jagnuts.htm
> _______________________________________________