[Mg-t] TD front fenders

[John Seim]

That was a factory stiffener piece.

John Seim
Irvine, CA

On Aug 22, 2016, at 7:25 PM, Stan Fickes wrote:

> While examining my front fenders in preparation for some metalwork, my welder pointed out a ~3/8" wide metal strip tacked (welded or brazed every six inches or so) to the inside of each rolled edge on the outside edge of each fender. He thought that it was not a factory item, but something added. I can post pictures if it would be helpful. I'm not aware of any MGTDs closer than an hour, so would someone please reach behind the rolled edge of their front fender above the tire and tell me if there's a strip or just the rolled edge? They run from just behind the curved front end to nearly the rear end of the fender.
> Thanks!
> Stan Fickes
> Peacham, Vermont
> ______________________________________________
> 
> Mg-t at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/mg-t/kingseim@earthlink.net
>