[Shotimes] K&N Panel Filter

[John Zarebski]

I have a question about when you  re-oil the K & N filter. Do you spray the
pleats on both sides of the filter or is spraying one side (the side that
faces the air box) sufficient. Some time ago when I cleaned my filter I
sprayed both sides and encountered a problem of oil contaminating the MAF
sensor elements, this after following the instructions(hold can 3# away and
spray down each pleat). At the time I sprayed both sides.  Can anyone offer
any advice on re-oiling the filter. Thanks,

John
93 MTX