[Shotimes] SHO won't start

Ron Childs rbchilds@pacbell.net
Thu, 26 Jun 2003 08:08:09 -0700 (PDT)


Yes, battery cables. Clean the clamps & terminals at the battery and try again.
 
-Ron 


John Semchena <jhsem@umcc.ais.org> wrote:
When I turn the key to start all I get is a click or two from the starter
and then it and the power to the car dies. If I turn the key to off and
wait a minute the power comes back but the car still won't start.

1) I had the battery replaced and checked it; it's putting out 12.7 volts.
2) I pulled the starter and had it tested at two differt part stores and
they both said it was strong.
3) The leads to the starter are getting the full 12.7 volts from the
battery.
4) There are no codes stored in the EEC (hey, it *could* have been a bad
sensor!)


My next guess would be the battery cables. Any one else have a different
idea?

TIA.

John.
94 ATX (rare green)
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes