[Shotimes] K&N Panel Filter

[Carl Prochilo]

Sounds like you answered your own question.  If you over-oil or saturate the
filter, where's all that oil going to go?  The instructions I thought were
fairly clear in this regard.  You just need to get the filter to be red again
with no white areas.

----- Original Message ----- 
From: "John Zarebski" <jzarebsk@mnsi.net>
To: <shotimes@autox.team.net>
Sent: Thursday, June 26, 2003 1:56 AM
Subject: [Shotimes] K&N Panel Filter


> I have a question about when you  re-oil the K & N filter. Do you spray the
> pleats on both sides of the filter or is spraying one side (the side that
> faces the air box) sufficient. Some time ago when I cleaned my filter I
> sprayed both sides and encountered a problem of oil contaminating the MAF
> sensor elements, this after following the instructions(hold can 3# away and
> spray down each pleat). At the time I sprayed both sides.  Can anyone offer
> any advice on re-oiling the filter. Thanks,
>
> John
> 93 MTX
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes