[Shotimes] EEC-IV Self Test

[Steve Weinrich]

Only connect the indicated pins at the indicated time.  If you start
grounding the wrong pin at the wrong time, you probably won't like the
result.

Steve
----- Original Message -----
From: "Jacob Cassidy" <jcassidy1@hot.rr.com>
To: <shotimes@autox.team.net>
Sent: Friday, June 27, 2003 11:53 AM
Subject: [Shotimes] EEC-IV Self Test


> Hey all,
>
> I'm trying to do this self test for the first time. I have found the 6
> way connector and two one pin connectors. One pin connector #1 disables
> my tach and one pin connector #2 engages my fan and disables my check
> engine light. Hooking the wire to either pin doesn't seem to be working.
> First, any suggestions as to which pin I am supposed to use and second,
> is there anything to do besides just turning the key on. I read the
> article and SHO Times FAQ's but I am just looking for verification as
> neither of the two pins seems to run the test.
>
> TIA
>
> Jacob Cassidy
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes