[Shotimes] front hub

[Mike.Wojton@us.o-i.com]

Couldn't drill the remaining bolt out.  Broke a drill bit off inside.


Mike Wojton
Toledo, Ohio

-'95 Green MTX  3/01-1/03
   ShoShop y-pipe

-'95 White MTX
   '96 Brake Upgrade

"Avoid the clap." - Jimmy Dugan



shotimes-admin@autox.team.net wrote on 06/30/2003 11:04:52 AM:

> Use a bolt and a nut.
> 
> Dave
> ----- Original Message ----- 
> From: <Mike.Wojton@us.o-i.com>
> To: <shotimes@autox.team.net>
> Sent: June 30, 2003 9:44 AM
> Subject: [Shotimes] front hub
> 
> 
> > Is the front hub on an SHO the same as a regular Taurus?  My issue
> > is a broken strut pinch bolt.  Was doing the front-end on Car this
> > weekend.  Ball joints, tie rod ends, and struts.  Driver's side went
> > ok (as ok goes with front-end work), but the passenger side bolt
> > head snapped right off.  Tried to drill it out but broke a bit off
> > inside.  So I took the whole hub/strut assembly off to try to find
> > a machine shop to drill it out.  Someone here at work suggested a
> > hub from a salvage yard.  If it comes to that, does it need to be from
> > an SHO?
> > 
> > TIA
> > 
> > 
> > Mike Wojton
> > Toledo, Ohio
> > 
> > -'95 Green MTX  3/01-1/03
> >    ShoShop y-pipe
> > 
> > -'95 White MTX
> >    '96 Brake Upgrade
> > 
> > "Avoid the clap." - Jimmy Dugan
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes