[Shotimes] Brake Bias Plugs

[Ian Fisher]

Bubble gum then...seriously, why not just get the plugs from our trusty
SHO vendors? They aren't expensive although they are custom made and
won't be found in a Home Depot. I have a set from Josh and they are
quality pieces. I'm all for doing things myself and shopping around, but
the plugs are going to be more aggravation than they are worth when you
can get them already pre-made. Besides, supporting Josh or Mike will
give you that warm feeling when you sleep at night...maybe :)

Ian


-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of Bruce Malachuk
Sent: Saturday, March 08, 2003 12:43 AM
To: Midwest SHO Specialists; SHOtimes
Subject: Re: [Shotimes] Brake Bias Plugs


well if I had a welder that that would be easy and I wouldn't have
asked.

----- Original Message -----
From: "Midwest SHO Specialists" <SHOtimes@midwestsho.com>
To: "Bruce Malachuk" <bmalach1@nycap.rr.com>; "SHOtimes"
<shotimes@autox.team.net>
Sent: Saturday, March 08, 2003 12:35 AM
Subject: Re: [Shotimes] Brake Bias Plugs


> Not to oversimplify things Bruce, but you can remove your current 
> valves
and
> weld shut the hole in the end.  That's it. :>)
>
> Mike Kopstain
> Midwest SHO Specialists
> 827 North Chestnut Avenue
> Arlington Heights, IL 60004
> www.MidwestSHO.com
> Sales@midwestsho.com
> ----- Original Message -----
> From: "Bruce Malachuk" <bmalach1@nycap.rr.com>
> To: "SHOtimes" <shotimes@autox.team.net>
> Sent: Friday, March 07, 2003 10:15 PM
> Subject: [Shotimes] Brake Bias Plugs
>
>
> > I've read everything on the shoforum about these, and they sound 
> > pretty simple. Paul Nimz had listed some specs about them " The 
> > thread is
M16x1.0
> and
> > you need two Vitron O-rings 3/8" OD x 1/4" ID x 1/16" and I was
wondering
> if
> > anyonecould direct me to finding a local kind of place to get what I
need
> to
> > make my own? I'd buy some from SHOnut or Midwest SHO, but I wanted 
> > to
see
> if I
> > could make them myself. I can't imagine that they cost more than a 
> > few
> bucks
> > to make. Like could I go to Home Depot and find something to use, or
maybe
> a
> > plumbing supply place? Kinda want to do this for as little as 
> > possible.
> Maybe
> > I could make plugs outta some JBweld, though that wouldn't be
reversible.
> >
> > Thanks in advance
> >
> > Bruce
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net 
> > http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes