[Shotimes] Brake Bias Plugs

[Midwest SHO Specialists]

It also gives our bill collectors a warm feeling.  :>)

Mike Kopstain
Midwest SHO Specialists
827 North Chestnut Avenue
Arlington Heights, IL 60004
www.MidwestSHO.com
Sales@midwestsho.com
----- Original Message -----
From: "Ian Fisher" <ianf@eden.rutgers.edu>
To: "'Bruce Malachuk'" <bmalach1@nycap.rr.com>; "'Midwest SHO Specialists'"
<SHOtimes@midwestsho.com>; "'SHOtimes'" <shotimes@autox.team.net>
Sent: Saturday, March 08, 2003 1:09 AM
Subject: RE: [Shotimes] Brake Bias Plugs


> Bubble gum then...seriously, why not just get the plugs from our trusty
> SHO vendors? They aren't expensive although they are custom made and
> won't be found in a Home Depot. I have a set from Josh and they are
> quality pieces. I'm all for doing things myself and shopping around, but
> the plugs are going to be more aggravation than they are worth when you
> can get them already pre-made. Besides, supporting Josh or Mike will
> give you that warm feeling when you sleep at night...maybe :)
>
> Ian
>
>
> -----Original Message-----
> From: shotimes-admin@autox.team.net
> [mailto:shotimes-admin@autox.team.net] On Behalf Of Bruce Malachuk
> Sent: Saturday, March 08, 2003 12:43 AM
> To: Midwest SHO Specialists; SHOtimes
> Subject: Re: [Shotimes] Brake Bias Plugs
>
>
> well if I had a welder that that would be easy and I wouldn't have
> asked.
>
> ----- Original Message -----
> From: "Midwest SHO Specialists" <SHOtimes@midwestsho.com>
> To: "Bruce Malachuk" <bmalach1@nycap.rr.com>; "SHOtimes"
> <shotimes@autox.team.net>
> Sent: Saturday, March 08, 2003 12:35 AM
> Subject: Re: [Shotimes] Brake Bias Plugs
>
>
> > Not to oversimplify things Bruce, but you can remove your current
> > valves
> and
> > weld shut the hole in the end.  That's it. :>)
> >
> > Mike Kopstain
> > Midwest SHO Specialists
> > 827 North Chestnut Avenue
> > Arlington Heights, IL 60004
> > www.MidwestSHO.com
> > Sales@midwestsho.com
> > ----- Original Message -----
> > From: "Bruce Malachuk" <bmalach1@nycap.rr.com>
> > To: "SHOtimes" <shotimes@autox.team.net>
> > Sent: Friday, March 07, 2003 10:15 PM
> > Subject: [Shotimes] Brake Bias Plugs
> >
> >
> > > I've read everything on the shoforum about these, and they sound
> > > pretty simple. Paul Nimz had listed some specs about them " The
> > > thread is
> M16x1.0
> > and
> > > you need two Vitron O-rings 3/8" OD x 1/4" ID x 1/16" and I was
> wondering
> > if
> > > anyonecould direct me to finding a local kind of place to get what I
> need
> > to
> > > make my own? I'd buy some from SHOnut or Midwest SHO, but I wanted
> > > to
> see
> > if I
> > > could make them myself. I can't imagine that they cost more than a
> > > few
> > bucks
> > > to make. Like could I go to Home Depot and find something to use, or
> maybe
> > a
> > > plumbing supply place? Kinda want to do this for as little as
> > > possible.
> > Maybe
> > > I could make plugs outta some JBweld, though that wouldn't be
> reversible.
> > >
> > > Thanks in advance
> > >
> > > Bruce
> > > _______________________________________________
> > > Shotimes mailing list
> > > Shotimes@autox.team.net
> > > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes