[Shotimes] Question On Suspension

[Ron Childs]

I believe that adding washers to the steering rack mount is to help with bump steer on a lowered vehicle. I'm not sure if Eibachs lower it enough to make a difference. To get your camber right, the welds at the top of the front strut towers have to be cut so that the top of the strut can be moved around to get your alignment right. 
 
If cutting the welds and elongating the slots that the three mounting screws go through will not give enough movement to correct your camber, there are mounting kits that a good alignment shop should have to help with that.
 
-Ron Childs   '91
 Frank Costa <fcosta@comcast.net> wrote:I have Koni's and Eibachs on my 89 SHO right now and i must say i am not very impressed with them (after driving them for 8000 miles)........Something isnt correct. My driver's side front wheel is leaning a bit and i cannot correct it. I do beleive good OLD G.F. had a similar problem and suggested adding washers to the Power Steering rack. Is this so? Can you elaborate at all? I just want to understand this.

PLUS: I get a knock sound in the rear of my vehicle, i was thinking it was the strut mount but im not sure. PLease, any assistance would be great.

Frank
89 SHO
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes