[Shotimes] Question On Suspension

[George Fourchy]

On Fri, 28 Mar 2003 17:29:25 -0500, Frank Costa wrote:

>My driver's side front wheel is leaning a bit and i cannot correct it. I do beleive good OLD G.F. had a similar problem and suggested adding washers to the Power Steering rack. Is this so? Can you elaborate at all? I just want to understand this.

OLD.....???  WHO YOU CALLIN' OLD!!!!???  ;-)

My problem was way too much camber (negative) due to tired ball joints and more
tired lower inner control arm bushings.  I just swapped the LCAs and got rid of most
of the camber.  There is still more than the factory suggests, but since I am not
cupping the RE 730s anymore, and it handles like a go-cart, Im satisfied.  

How many miles do you have on the car, or more specifically, on the LCAs?

It might be a good time to change them, and also the tension strut bushings.

I haven't had to do a thing to my steering rack.  It definitely could use a flush,
but mechanically and structurally it is the same way it came from the factory. 
Remember also, that my car is more or less stock height.

George