[Shotimes] Front Rotor Warping Update
Leigh Smith
leighsm@concentric.net
Thu, 01 May 2003 14:26:26 -0400
Jim & Debbie;
I think you made a great choice in new rotors & especially the ceramic
pads. See no reason why that shouldn't solve your rotor warping issues.
Keep us informed either way.
Since you have the 11.6 rotors, I don't really see any reason to go thru
the break-in procedure, not with this type of pad, unless you just want
to. It shouldn't hurt, but it may not help either. The need for this
varies by pad. Just don't go crazy with it, and drive them normal for a
couple days first to let things seat-in.
Leigh
BTw: Didn't realize your power slots were flash chromed. That could
definately be an issue in itself.
Jim and Debbie Leyden wrote:
> OK...
>
> Here goes!
>
> On Monday I called all over to find a place that does Cryogenic treatment
> and found a place in North Georgia that does it. He wants $30 each to treat
> the rotors and prefers that they be shipped to him instead of dropped off.
> So I went to see a friend of mine (that just happens to be a NAPA Store
> Manager) and we talked at length about all the different options for my
> front brakes. When I added up all the costs of treatment and shipping I
> decided that it comes out MUCH cheaper to just cash in a set of lifetime
> rotors every time I warp one. He made me a pretty good deal on a pair of
> lifetime warranty rotors and the ceramic pads. (came to $162 total so you
> tell me if he is a good friend or not) ;-]
>
> I pulled off the old pads and (brand name) Power Slots and found that with
> the exception of the slots and flash chrome the Power Slots are EXACTLY the
> same rotor as the Napa Lifetime (I was told that they were Raybestos brand
> but the casting says VARGA and they are stamped TRW). Anyway, when I
> removed the old pads they were stamped with an "LS" logo on the back.
> Identical to the LS logo on my calipers. Anyone know what the LS might
> stand for? The one rotor had a localized hot spot on it (actually an almost
> dark blue color) which I assume was the problem, so I'm guessing that the
> set of rotors is trash.
>
> Now the car is a dream to drive again (I hope the dream lasts longer this
> time!) and I don't feel like the world is staring at me whenever I hit the
> brakes.
>
> Jim
> '93 MTX
>
>
>
> -----Original Message-----
> From: shotimes-admin@autox.team.net
> [mailto:shotimes-admin@autox.team.net]On Behalf Of Leigh Smith
> Sent: Monday, April 21, 2003 11:39 AM
> To: Jim and Debbie Leyden
> Cc: Shotimes@Autox.Team.Net
> Subject: Re: [Shotimes] Front Rotor Warping
>
>
> Jim;
> Have been reading your brake rotor woes with some interest. Let me see
> if I have the facts straight: 93 MTX, 11.6 rotors, NAPA / Powerslot
> rotors, OEM ? pads (@ FPS), break-in procedure.
>
> Honestly, I can't figure why you would be having problems with that
> setup either. It almost seems as if we're missing something.
>
> You could be driving like a maniac and overheating them, but that
> doesn't seem too likely.
>
> It sounds like the pads are overheating, either because of a sticking
> caliper / pin issue, or cheap pads that don't like the temps they are
> being exposed to. Auto part store "OEM" pads ARE NOT GOOD ENOUGH. Or you
> got cheap rotors that don't like the temps they are being exposed to.
>
> You could be ruining the rotors by overheating the PADS during the
> breakin procedure. The Breakin procedure accompishes two things, it
> breaks in the pad, at the lower temp that they like, and it heat cycles
> the rotor at a much higher temp, like 600F up. If you have cheap pads
> on, they will overheat during the rotor heat cycling and may ruin the
> rotors. Motto: buy great pads, or heat the carefully, not too hot, stay
> below the "smell zone".
>
> Are you sure the pads are Ford OEM in the proper larger pad size? The
> FORD OEM pads are much better than part store OEM pads. Honestly, I
> can't believe FPS would use anything else, but things happen.
>
> The rotors could be cheap forgings. If they are cooled too quickly they
> may take a differrent set after you heat them. And it costs too much for
> the factory to let them sit around and cool slowly. You could
> alternatively: A) Buy a better set B) Heat treat them in your oven (I'm
> serious) C) Heat treat them by getting them hot during the breakin
> procedure. Easier and better than the oven. You may have to have them
> cut immediately afterward though if they warp due to cheap metal. D)
> Have them cryogenically treated (even better).
>
> Once the rotors develop hard spots in the metal from localized
> overheating (feels like vibration) you can probably never truly grind it
> off. It's usually too deep. New rotors are the only real cure unless you
> catch it early. Blanchard grinding will help, but the hard spots may remain.
>
> Cheap pads are like death to rotors on these cars. There is just too
> much weight and pressure on the front rotors. I only recommend some
> carbon mettallic based pad. Some have had good luck with OEM w/ 11.6 in.
> but they must be the FORD pads, ask to see the box. Semi-mettallic pads
> (like the Ford ones) are very marginal. Part store pads can easily ruin
> your rotors during the break-in procedure, or anytime you use them
> really hard.
>
> Given your history of problems, I'd recommend the following:
>
> Borrow my infrared pyrometer if you want and make sure you don't have
> some strange sticking caliper/pin issue that is getting your rotors past
> 600F. That's the normal "smell zone". You really don't even need the
> pyrometer, it just might make you feel better. If they are getting that
> hot, you can easily smell them, and it is not a pretty smell. The
> pyrometer or lack of smell should confirm that your brakes rarely get
> past 400F. That would rule out maniac driving and caliper issues. If
> that is so, you should be fine with the Ford pads, and you have got
> another issue, not a mechnical one.
>
> Also monitor the temps in this manner during your "breakin" procedure.
> Don't get them realy smelly unless you have really good pads on.
>
> Buy some inexpensive Perfomance Friction Carbon Mettallic Pads first
> ($30?). You can't overheat them, they'll take 800-1000F without ruining
> your rotors in the process.
>
> Have the existing rotors turned or blanchard ground at the same time.
> Break them in, just to the point of smelling them. Don't go overboard
> here. If you stick with FORD pads, I'd skip the breakin step entirely.
>
> If localized hard spots remain in the old rotors the vibration may
> return over time.
>
> Then buy brand new good quality rotors as step two, making sure you have
> good pads and the rotors are not getting too hot first. You don't want
> to risk damaging the new rotors again.
> Stay away from slots /holes.
> Get them cryogenically treated if you want, but I can't believe you need
> it. Not even for track events, but it is good insurance. I'd rather see
> you buy some carbon pads.
> If you don't like the dust from the PFC pads, buy some better and more
> expensive carbon pads later. Carbotech, Porterfield or Raybestos Quiet
> stop ceramic.
>
> There is no reason following this procedure shouldn't solve your
> problem. Just ask Josh, he was killing rotors and it turned out he had
> cheap pads after all, and they didn't like the heat.
>
> Auto part store OEM pads ARE NOT GOOD ENOUGH for our SHOs, at least not
> all of us anyway.
>
> Good Luck
>
> Leigh
>
>
>
> Jim and Debbie Leyden wrote:
>
>>I bought the OEM pads from FPS at the same time I put the first set of
>>rotors on. I drove the car carefully (using the brakes only lightly) for
>>the first week. Then I went out and performed the breakin procedure that
>
> is
>
>>outlined on that website. I even went to the extreme of printing out the
>>instructions and taking them in the car with me while I did the breakin.
>
> At
>
>>no time did (or do)I EVER sit in traffic with hot brakes and keep the
>
> brakes
>
>>applied hard. (if the car will sit at a light in neutral without rolling
>>that is what I do. If it won't, I will let it slowly creep with the
>
> brakes
>
>>barely applied so the pads can't burn to the rotor) I have inspected the
>>rotors visually and I can see no evidence of friction material transfer on
>>the rotors.
>>
>>Like I said... we have been extremly careful with this set of rotors to
>
> not
>
>>mess them up.
>>
>>Another thing that is bothering me is the act of having the rotors turned
>
> by
>
>>a service center. Being a former machine tool builder I understand all
>>facets of manufacturing processes and I firmly believe that the act of
>>turning a rotor is destructive to the friction surface. I would like to
>
> get
>
>>them Blanchard ground using the hubs mating surface for the baseline but I
>>have no clue as to where I could find a machine shop around the Atlanta
>
> area
>
>>that could tackle this.
>>
>>Jim
>>'93 MTX
>>
>>
>>
>>-----Original Message-----
>>From: Paul Nimz [mailto:pmnimz@V8SHO.com]
>>Sent: Saturday, April 19, 2003 3:47 PM
>>To: Jim and Debbie Leyden; Shotimes@Autox.Team.Net
>>Subject: Re: [Shotimes] Front Rotor Warping
>>
>>
>>What kind of pads do you use? Do you seat the pads after a 100 miles?
>
> Read
>
>>this for a controversial opinion.
>>http://www.stoptech.com/whitepapers/warped_rotors_myth.htm FWIW on my '97
>>with the OEM rotors and 90k they didn't warp. And now with AZ rotors
>
> still
>
>>no problem. I have only used the OEM pads and am very pleased with them.
>>
>>Paul Nimz
>>'97 TR SHO
>>'93 EG mtx SHO
>>
>>
>>----- Original Message -----
>>From: "Jim and Debbie Leyden" <jndleyden@mindspring.com>
>>To: "Shotimes@Autox.Team.Net" <shotimes@autox.team.net>
>>Sent: Saturday, April 19, 2003 1:08 PM
>>Subject: [Shotimes] Front Rotor Warping
>>
>>
>>
>>
>>>A little over a year ago I upgraded my brakes to the 11.6 front rotors.
>>>When I did the conversion I used new pads, rotors, brackets, slider pins,
>>>calipers and backing plates. The knuckles were purchased from a boneyard.
>>>About six months ago the car started to vibrate when braking. I checked
>>
>>the
>>
>>
>>>front rotors and found that there were casting porosities in them. I
>>
>>talked
>>
>>
>>>to the place where I purchased them and they agreed to credit me the cost
>>>towards a set of PowerSlot rotors. Well, now six months later I again
>>
>>have
>>
>>
>>>a nasty vibration from the front end when braking. My wife and I have
>>
>>been
>>
>>
>>>VERY careful with these brakes so as to not overheat them. (I DO drive
>>>rather hard but I use engine braking as well as brakes) I talked to the
>>>shop where I purchased them and was told that the same situation had
>>
>>arisen
>>
>>
>>>with the owners car (powerslots also) and he merely had to take them out
>>
>>and
>>
>>
>>>REALLY heat them up to correct the problem. I tried this, it seemed to
>>
>>work
>>
>>
>>>for a little while (couple weeks they were fine) but now the shaking is
>>
>>back
>>
>>
>>>and even worse then before.
>>>
>>>Any clues as to why I can't keep a set of rotors from warping?
>>>
>>>Jim
>>>'93 MTX
>>>perfect for that commercial where the guy is shaking his chocolate milk.
>>>_______________________________________________
>>>Shotimes mailing list
>>>Shotimes@autox.team.net
>>>http://www.team.net/mailman/listinfo/shotimes
>>
>>_______________________________________________
>>Shotimes mailing list
>>Shotimes@autox.team.net
>>http://www.team.net/mailman/listinfo/shotimes
>
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes