[Shotimes] Trick to removing rear ABS sensor?

[Tim Dahm]

If your SHO has spent any time in the "rust belt"
the sensor will be seized in the knuckle and will be destroyed if you
attempt to remove it. Leave the sensor in place and unplug it at the
connector in the trunk.

Tim
----- Original Message -----
From: "Ron DeReus" <dereus@fbx.com>
To: "Shotimes" <shotimes@autox.team.net>
Sent: Saturday, May 10, 2003 11:04 PM
Subject: [Shotimes] Trick to removing rear ABS sensor?


> I'm trying to get the left rear knuckle off to drill out the strut pinch
> bolt in a drill press.  What is the trick to getting the ABS sensor out?
My
> Chilton's just says "remove it."  Well, I have the single 10mm bolt out
that
> appears to have been securing it, but its still very solidly in the
backing
> plate.  TIA.
>
> Ron DeReus
> 95MTX
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes