[Shotimes] Water pump replacement question
ATXSHO93@aol.com
ATXSHO93@aol.com
Sun, 11 May 2003 12:50:32 EDT
In a message dated 5/10/03 7:45:04 PM Pacific Daylight Time,
fwhittle@mindspring.com writes:
> '95 ATX. I bought a new Ford water pump, which is complete with the
> front and rear sections. Is it necessary to replace the whole thing, or
> can I just separate the front pump portion from the rear piece and install
> the pump portion on my old rear piece still bolted in place?
When I replaced my ATX's water pump back in '99 I removed the entire unit. I
also had O-ring leaks behind the pump that needed to be addressed. I would
not have noticed the O-ring leaks if the rear housing had not been removed.
I would replace the entire unit O-rings and all.
John Gentry
'93 ATX w/ mods