[Shotimes] Trick to removing rear ABS sensor?

[Ian Fisher]

There's no point in removing it. Just unplug it from under the back seat
and leave it in the spindle.

Ian

-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of Alan Fanning
Sent: Sunday, May 11, 2003 12:48 PM
To: SHOtimes
Subject: Re: [Shotimes] Trick to removing rear ABS sensor?


Probably RUSTED in there (remember what that is George?)  as there is
nothing but the little bolt to hold it otherwise. Time for the
penetrant, maybe a _little_ heat, a little cursing, etc.

    Alan

> On Sat, 10 May 2003 23:04:27 -0500, Ron DeReus wrote:
> 
>> Well, I have the single 10mm bolt out that
>> appears to have been securing it, but its still very solidly in the 
>> backing plate.  TIA.
> 
> If you can get hold of the plastic housing without endangering 
> anything else, try to twist it a little at a time to loosen it where 
> it goes through the backing plate.  I
> haven't looked closely at the rear ABS sensors, but if they're like
the
> fronts, and
> the fastener is out, you should be able to work it loose a little at a
time.  
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes